Menu
Cart 0
Porsche Boxster Cayman 1997-2012 Spin-On Oil Filter Adapter Replaces 10601 ReplicaParts.co.uk

Porsche Boxster Cayman 1997-2012 Spin-On Oil Filter Adapter Replaces 10601

  • £143.90

LN Engineering spin-on oil filter adapter for Porsche Boxster and Porsche Cayman with model years 1997 to 2012.

The LN Engineering Spin-On Oil Filter Adapter helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter. This limits collateral damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris.

Since a steel-bodied spin-on conventional oil filter is now employed, you can further reduce engine wear by using a Filtermag, which reduces iron contaminants in your motor oil and thus reduces wear associated with these particles normally unfiltered by the oil filter.

When installing, be sure to lubricate both o-rings with clean engine oil. Screw the oil filter adapter onto the engine by hand. Once the spin on filter adapter is fully engaged to the block, use a 26mm socket and torque to 25 Nm (18 Ft/Lbs). Also be sure to oil the filter gasket.

Filter should be installed by hand then once snug, turned another 3/4 to 1 turn to finish filter installation or to the filter manufacturers recommended specifications.

Oil change interval should not exceed 6 months or 5,000 miles for street using a 0w40 or 5w40 viscosity motor oil; higher viscosity is not recommended. The filter used in conjunction with the spin on oil filter adapter is from a 1997-2004 Chevrolet Corvette and is an excellent choice for this application with adequate size and very high burst strength of 320 PSI (when using a Napa Gold 1042 or Wix 51042 filter)

For track use, our Billet High Performance Oil Filter is required and a race oil should be used with no more than 500 miles total drive time between oil changes.

Fits 986/987 as well as 996/997 models (& Cayenne S/Turbo MY03-06) & replaces Porsche part numbers 996 107 020 53 (54, 55) and 996-107-225-53.

For 987.2 MY09+ Boxster and Cayman models, use part number 106-01.3.

Please note: For use in 996 and 997 engines only. This part does not work with 911 Turbo/GT2/GT3 engines.

Pack quantity: 1

Models:

  • Porsche Cayman 996 - 1997-2004
  • Porsche Boxster 996 - 1997-2004
  • Porsche Cayman 997 - 2004-2012
  • Porsche Boxster 997 - 2004-2012

Part number equivalents:

  • 106-01
  • 106.01
  • 106 01
  • 10601